Beams Matching Service for Your Racking in Greater Sydney, NSW
Matching Beams
Many manufacturers paint their beams orange and their uprights blue. So, it is impossible to accurately match beams based on colour alone. Providing us with the name of the manufacturer and/or a photograph accompanied by an accurate measurement will greatly assist us in matching your beam exactly.
When replacing or adding beams to your existing racking, it is essential that the length of the beam is specified correctly. If you have existing racking or shelving, even a few millimetres can be the difference between the new beams fitting correctly and them being unusable. The way standard beams are measured varies between manufacturers. It is also not uncommon for beams to have been adapted or modified - which may also contribute to your standard beam being not quite standard.
If we find that your beams are, in fact, a non-standard size, we can arrange for their supply, but there is a minimum order quantity of 10 for this service.
How to Measure Your Beam
Make sure you include the thickness of the metal, as outlined in the photograph on the left above.
Ensure you measure from this point on the left-hand side of the beam to the corresponding point on the right-hand side.
Reach us at 02 9722 6444 for accurate beam matching and fitting.